Quasar CM-3211 Series Installationsanleitung PDF herunterladen (Seite 37)

Quasar CM-3211/CM-4221 Series User and Installation Guide

6.7 Adjusting and Framing-Up the Camera View

After the camera is connected to the network and running, it is necessary to frame-up the scene and

adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being used,

consider scheduling different settings for changing ambient conditions throughout the day, week,

month or seasons.

To adjust and frame-up the camera view:

1. In the DNA application, click DNA.

2. In the results, click to select the camera.

3. Right-click to open the shortcut menu, and select Browse, or enter the camera’s IP address

in your Internet browser’s URL address bar.

4. When the Internet browser connects to the camera and prompts for login, do the following:

a) Log in using the default user name Admin and password 1234. If the password has

previously been changed, use the new password.

b) Allow the ActiveX to download and choose to install the DVTEL Web Player

(DCViewer).

5. On the camera, loosen the screw on the tensioning collar of the camera tilt axis.

6. On the camera, adjust the rotation, pan and tilt angles as required for the desired view of

the scene. When finished, retighten the tilt-arm tension screw.

Figure 25: CM-3211/4221 Camera – Pan, Rotate and Tilt Angles

Caution:

To prevent camera damage, do not over extend the tilt range beyond -10° to 90°.

Tip:

To view greater image detail for more accurate high-definition focusing, on the

Web Base Viewer home page, click Full Screen and check the focus.

Note:

Best focusing results can be achieved when the lens iris is fully open (such as at

night in low light). This prevents loss of sharpness if light levels are reduced at night.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 136 137

Keine Kommentare

Quasar CM-3211 Series Installationsanleitung Seite 37